学术论文详情

摘要：Plastic hinge model has been widely used in bridge seismic design codes such as Japan, Caltrans, New Zealand and China (revised edition), to evaluate deformation capacity of RC bridge columns. With the development of bridge performance/displacement based seismic design, several damage indices have been suggested, such as ultimate curvature and curvature ductility factor of critical section, maximum strain of confined concrete and reinforced steels, low cycle fatigue damage indices of longitudinal reinforcement etc. To study the accuracy degree of damage indices calculated with plastic hinge models and the main influencing factor, a computer program was developed employing 5 plastic hinge models to compute aforesaid damage indices compared with test data of RC bridge columns. The study results show that force-displacement curves and residual deformation calculated match the experiment with adequate accuracy, but the strain of longitudinal steel is overestimated and the strain of core concrete is underestimated. The computed ultimate curvature is lower than experiment results when shear span ratio is not less than 8. It is also recognized that under the same loading control displacement, loading path hardly affects the aforesaid damage indices.